Voice Tracker I
The Voice Tracker Array Microphone was the original implementation of our patented, automatically and electronically steering, "listening beam" technology. It has an analog audio output at mic level, and is powered by a wall power converter so there is no risk of loss of performance as batteries run out. A USB adapter is an available option for use with MACs, and laptops with low performance sound cards. It has built in ceiling mount capability, which removes the clutter of mics on the conference table. It can be used in conventional and VoIP conferencing systems that need the AEC built into the microphone itself. More info @ https://www.acousticmagic.com/products/voice-tracker-i-details/
- Range- 30+ feet for meeting recording (depends on acoustic characteristics of the room.)
- 360" Scanning range
- 8 Mic Elements
- Microphone tilt capability to facilitate desktop, monitor top, ceiling, or wall mounting
- Analog Output:Mic level,3.5mm mini stereo jack
- 18 inch long array for maximum range
- Two stage noise reduction
- Automatic electronic steering of listening beam to talker location
Selectable steering limits for speech recognition and meeting recording modes.
- Selectable LDS™ to reduce annoying interference of additional talkers during speech recognition or feedback during teleconferencing
- 8 element, 18 inch long array for maximum range
- Weight: 1.5 pounds(excluding wall power supply)
- Power: converter from 120V AC to 6V DC included
Speech Recognition: Since the Voice Tracker operates differently from other types of microphones or audio input devices, you should retrain your speech recognition software. Be sure to select USB Array Microphone during the “New User” setup. Personalized vocabulary can usually be transferred to the retrained “User”.
Troubleshooting: Acoustic echo cancellation. If the ref signal is too strong or too weak, AEC will not work well. Make sure the playback level in the PC is set to midscale. Turn up the volume on the (external) speaker itself if more loudness is desired.
No Audio: Check whether the LEDs track the talker. If not, reboot (repower). If so, the problem is probably in the computer setup. Make sure it is looking for recording input where the Voice Tracker is connected (USB, Mic in, or Line in).
Analog or USB Audio too strong.
Make sure the output level switch is set to mic level
Analog or USB Audio too weak.
Make sure the output switch is set to line level
Range. 30+ feet for meeting recording
Analog Output-Mic level 3.5mm mini stereo jack. Same signal on tip & ring. 500ohm output impedance.
Frequency Response. 100Hz to 11250 Hz
Physical Dimensions: Length: 18", Height: 2.5", Weight: 2.5lbs
Power Equipment: 6V DC, 400ma, center Pin Positive